VecoCuby Up to 6 L/Day 750 sq-ft (support paper towels as wick) Non-Electric Evaporative Humidifier UNI-HT1P5G-NoPan (Optional cloth wicks pre-installed: Yes)

This product is a smaller verson of VecoCuby TWIN-HT3G except requiring the user to provide a water pan (e.g., a baking pan) to form a working humidifier. You may receive any one (NOT both) of the twin frames nested to each other as shown in VecoCuby TWIN-HT3G list depending on our inventory stocks, with the only 1" size difference in depth. There is no difference in performance between the twin frames. The eco-friendly fabric-based evaporative humidifying is rejuvenated with our patent-pending innovations. With up to 6 L/day and a setup reducing cloth wicks cleaning need to once a year, it overcomes many drawbacks of traditional humidifiers. Easy installation of the cloth wicks (see the Guide section of the product in our website https://achecosimpventive.com). Comparison of traditional humidifiers: (1) Vaporizers: large electric bill, salt required for every refill of water, unstable throughput, hard to clean, risk of steam burning, risk of mold growing at home due to over-humidifying, noise from boiling water, short lifespan due high temperature environment of electric components; (2) Ultrasonic humidifiers: either spraying minerals and germs in the water into the air OR extra spending for distilled water/filters, risk of mold growing at home due to over-humidifying or RH-controlling sensors aging; (3) Built-in fan evaporative humidifiers: noisy, expansive in initial cost and regular wicks replacement; (4) HVAC built-in humidifier: extremely expensive, high risk of mold growing especially inside the HVAC ducts at cold spots or due to over-humidifying from RH-controlling sensors aging, extra cost for filter replacement.

• This product includes one frame and two cloth wicks, a smaller verson of VecoCuby TWIN-HT3G except requiring the user to provide a water pan (e.g., a baking pan) to form a working humidifier. The frame can be placed in a slant angle in the pan. The pan should have a minimum internal floor width of 6.5 inch to allow the installed cloth wicks to be in contact with the water inside the pan. The pan should have a minimum internal floor size of 13.1"x6.5" if flat placement of the frame inside the pan is preferred.
• The MOST cost-effective per unit water throughput, a fractional running cost compared to others: ~ 1/5 of fan evaporative type, ~1/10 of filtered or <1/20 of distilled water ultrasonic type, <1/20 of vaporizer, <1/5 of HVAC built-in types (depending on tech);
• trap dust and lint, no mess to furniture, floor, etc. (ultrasonic humidifiers blow minerals, bacteria, etc. in the water directly into the air unless you spend extra regularly for distilled water or filter);
• Silent operation (no fan noise, no vaporizer's bubbling sound);
• Simple operation (once a year rinsing setup, no salt or any chemical to add, no filter to replace, no trip for distilled water, no broken electronics to worry);
• Eco-friendly design (no decorative panels; using a spare pan at home for the humidifier to save; long-lasting refreshable cloth wicks, you may also use your own cloth/towel or even kitchen paper towels as wicks for infrequent replacement if any);
• Lower risk of mold growing in the house from excessive humidity (Its evaporation rate reduces as RH increases, unlike free-running ultrasonic humidifiers and heated vaporizers. Many RH sensor-controlled humidifiers, such as built-in HVAC ones and some ultrasonic ones, may have issues related to incorrect readings from the sensors degraded over time);
• If all warm mist vaporizers in the US are replaced with our non-electric humidifiers, it is equivalent to build a 10 GW power plant (a large nuclear plant outputs about one GW). In an AI driven power-thirsty era, we hope our humidifiers can help our environment! Read more/additional product details for comparison among different types of humidifiers. Patent pending.